| "Pronto" Links→ | HOME | TABLE OF CONTENTS | WHAT'S NEW | ORDER FORM |
We call this our Basic-Line because basically, everyone has them!
But when you buy these racks from FixturePronto
we
think you will save some hard earned capital.
That's because we ship them direct from the factory warehouse closest to your store.
All Basic-Line Garment Rack are made from commercial grade chrome plated
steel tubing
and most feature independently adjustable arms.
They ship "knocked-down" and are
easily assembled with hardware and tools provided in the shipping cartons.
As with any "KD" assembly, please hand tighten all fittings on a level surface
before securing with tools.
|
|
|
Four Arm Garment
Racks Bases made of 1"x1" square chrome plated steel tubing with adjustable levelers for each leg. The Arms are made of 3/4"x3/4" square chrome plated steel tubing and adjust independently every 3" from 48" to 72" high.
|
||||||||||||||||||||
|
|
Four Arm Handbag
Racks Bases made of 1"x1" square chrome plated steel tubing with adjustable levelers for each leg. The Arms are made of 3/4"x3/4" square chrome plated steel tubing and adjust independently every 3" from 48" to 72" high with 4 extra clamp-on arms for 2-tiered presentation.
|
|||||||||||||||||||||
|
|
|
Two Arm Garment
Racks Uprights made of 1"x1" square chrome plated steel tubing with 12"x15" heavy weighted base. The Arms are made of 3/4"x3/4" square chrome plated steel tubing and adjust independently every 3" from 48" to 72" high.
|
||||||||||||||||||||
|
|
Two Arm Rolling
Garment Rack Features a heavy duty rectangular upright made of chrome plated steel tubing with same materials used for the X-Base. The Arms are made of 3/4"x3/4" square chrome plated steel tubing with 16" rectangular face-outs that adjust independently every 3" from 48" to 72" high. Locking casters included.
|
|||||||||||||||||||||
 K40 |
Parallel Hang Bar
Garment Rack Frame made of 1"x1" square chrome plated steel tubing with adjustable levelers for each leg. The Hang Bars are 1-1/4" diameter chrome plated steel tubing and adjust independently every 3" from 48" to 66" high. Overall size is 60"L x 22"W. See below for extra and add-on hang bars.
|
|||||||||||||||||||||
 K41 |
Reinforced Parallel
Hang Bar Garment Rack Same as K40 above, but includes a V-shaped brace that increases stability and affords the option for caster wheels (sold separately). Overall size is 60"L x 22"W. See below for extra and add-on hang bars.
|
|||||||||||||||||||||
 KH1 |
 KH2 (Shown on K40) |
Add-on Hang
Bars for K40 & K41 KH1 is a pair of 60" long hang bars with a special end-tab that fits between two Parallel Racks and gives you the linear hanging space of 15' each side. KH2 is a pair of 60" long hang bars with mounting brackets that attach to the frame of a Parallel Rack. You raise the adjustable hang bars up to the desired height then clamp the KH2 below to provide 2 tiers of hanging space in just 60" of floor space.
|
||||||||||||||||||||
 K43 |
Rolling Hang Bar
Garment Rack Frame made of 1"x1" square chrome plated steel tubing with 3" heavy duty casters each leg. The Hang Bar is 1-1/4" diameter chrome plated steel tubing and adjusts every 3" from 54" to 74" high. Overall size is 60"L x 20"W.
|
|||||||||||||||||||||
|
Z-Base Hang Bar
Garment Rack Ideal for use in showrooms and warehouses. Will nest together when not in use. Knocked-down construction - Z base comes in 3 parts that bolt together. Hangrail is made of 1-1/4" round tubing and measures 60 1/2" long, 70" high. 4" industrial casters.
|
|||||||||||||||||||||
 RCS/1 |
Folding Hang Bar
Garment Rack This very popular garment rack is also known as a Salesman's Rack as it was originally used by traveling sales representative to transport their apparel. But it's versatility has made it so desirable that it is now found in many home furnishing mail-order catalogs (at a much higher cost!) 48" long hang bar with two 12" pullouts adjusts at 55", 60" and 65" heights. 4" diameter heavy duty commercial casters included. Folds down to about a 48"x20"x4" space. (Please note: While there are some low cost economy models of a similar rack in the marketplace FixturePronto does not to offer them because they are not as durable as this original model)
|
|||||||||||||||||||||
 RCS/3 |
Double Folding Hang
Bar Garment Rack Same features as the RCS/1 shown above, but with twice the hanging space. Please keep in mind that this rack fits easily through hallways and doors when empty as shown here, but with garments hanging on both hang bars you'll need an opening of almost 4' to get through!
|
|||||||||||||||||||||
 K52WD & K57WD |
Round Hang Bar
Garment Rack Frame made of 1"x1" square chrome plated steel tubing with levelers for each leg. The Hang Bar is 1-1/4" diameter chrome plated steel tubing and adjusts every 3" from 48" to 66" high. Available in 2 diameters with optional locking caster wheels (sold separately).
|
|||||||||||||||||||||
 K53 & K54 |
Revolving Round Hang
Bar Garment Rack A great alternative if walk-around space is limited as this rack can be placed in a corner and rotate to allow customer access to all items displayed. The Hang Bar is 1-1/4" diameter chrome plated steel tubing and adjusts every 3" from 48" to 63" high.
|
|||||||||||||||||||||
 K62 |
Half-Round Hang Bar
Garment Rack Frame made of 1"x1" square chrome plated steel tubing with levelers at three points. The Hang Bar is 1-1/4" diameter chrome plated steel tubing and adjusts every 3" from 49" to 73" high.
|
|||||||||||||||||||||
 K29 |
Spiral Costumer
Garment Rack This compact garment rack lets you show a cascade of many items in a very small space. It has 29 ball stops and measures 67" high, but has a weighted base of just 18" in diameter.
|
|||||||||||||||||||||
 K36 |
Lingerie Tower
Garment Rack While just 61" high this garment rack comes complete with 16 clamp-on arms that you can space as needed to show lingerie, swimwear or other short items. Each arm is 12" long and has a stop at the end to keep the goods in place. The frame is made of 1"x1" metal tubing and includes levelers.
|
|||||||||||||||||||||
 K26 & KREV26 |
Millinery (Hat)
Racks Two models each with 20 padded arms to hold all kinds of headwear. K26 has an upright fixed to the 14" square base plate, while KREV26 has a special fittings that let the hat tiers rotate on the upright.
|
|||||||||||||||||||||
 K56 |
Two Tier Rotating
Belt/Tie Rack The upright is 60" tall and attaches to a heavy-duty 18" diameter base. The upper rotating tier is 19" in diameter and has 20 hooks each 3" long. The lower rotating tier is 27" in diameter and has 28 hooks each 3" long. Great for belts and ties as you can set the spacing of the tiers as desired.
|
|||||||||||||||||||||
 K58 |
One Tier Rotating
Belt/Tie Rack The upright is 52" tall and attaches to a heavy-duty 19" diameter base. The rotating tier is 19" in diameter and has 20 hooks each 3" long.
|
|||||||||||||||||||||
 K98 |
Two Tier Adjustable
Belt/Tie Rack This high-capacity rack has an upper tier with 16 hooks each 4" long and adjusts in height from 49" to 58". The lower tier has 32 hooks each 4" long, so you have a total of 48 hooks in a small space. The heavy-duty weighted base measures 15"x20".
|
|||||||||||||||||||||
 K48 |
Two-Sided Shoe
Rack Frame made of 1"x1" square chrome plated steel tubing with adjustable levelers for each leg. Overall size is 66"H x 48"W. Comes complete with 8 adjustable shelves that measure 12" deep and can be placed as desired.
|
|||||||||||||||||||||
Return to Garment Racks Table of Contents
| "Pronto" Links→ | HOME | TABLE OF CONTENTS | WHAT'S NEW | ORDER FORM |
 |
We Accept |
Privacy Policy Facebook
Return Policy
Copyright © 2021 FixturePronto®.
All rights reserved.
